Abstract
Novel lean-burn combustor concepts were designed and evaluated for supersonic aircraft propulsion, with a focus on cruise NOx emissions. Premixing to lean conditions is especially challenging at supersonic cruise because combustor inlet temperatures are high and autoignition times are short. However, combustor pressure is significantly lower than at takeoff, so at cruise this allows heated jet fuel to be vaporized before injection as an aid to mixing. Two concepts—differentiated by swirler aerodynamics, swirler size, and staging method—were evaluated in the work reported here, both using injection of vaporized jet fuel. Computational fluid dynamics (CFD) calculations of mixing and combustion were used to design hardware for each concept. Injectors for each were fabricated using stereolithography (SLA) for cold-flow mixing tests, and using metal fabrication for subsequent combustion tests. Combustion test results show that emissions index for NOx (EINOx) < 5 was achieved for both concepts in single-sector tests at supersonic cruise combustor conditions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
