Abstract
Phenol is nonetheless considered a major pollutant and, therefore should be treated to eliminate the phenol in wastewater to save the environment, people, and organisms from the negative impacts of phenol. This study, for the first time, investigates the synthesis and performance evaluation of hexadecyltrimethylammonium bromide-functionalized cellulose nanocrystals (HDTMA-Br/CNCs) adsorbent for removing phenol from synthetic phenol-containing wastewater. The CNCs were prepared from as-received cellulose, by mixed acid hydrolysis consisting of sulfuric acid, glacial acetic acid, and deionized water in a mass ratio of 1:7:2. The prepared CNCs were functionalized by adding 20 g of the produced CNCs to the HDTMA-Br solution and stirred for 120 min . The synthesized and HDTMA-Br-functionalized CNCs were characterized using different analytical techniques, such as Scanning Electron Microscopy (SEM-EDX) to examine the surface morphology and the elemental composition of the modified and unmodified adsorbents. Fourier Transform Infrared (FTIR) was used to examine the attachment of the functional group. X-ray diffraction (XRD) was used to analyze the crystalline structure of the adsorbent. To evaluate the performance of the synthesized adsorbent in batch mode, 1 g/L of phenol was used to prepare the synthetic phenol-containing wastewater. The analysis of the feed and permeate was done using pre-calibrated High-Performance Liquid Chromatography (HPLC). The multi-BET surface area of CNCs was 24.11 m2 g−1, meanwhile, fCNCs possessed a higher surface area of 201.4 m2 g−1 with a pore volume of 0.069 cm3 g−1. About ∼75 ± 1.4% phenol removal was obtained for the functionalized CNCs compared to the non-functionalized CNCs adsorbent having ∼43 ± 0.1% phenol removal at 35 °C reaction temperature. It could be observed that the spent adsorbent a shows percentage phenol removal of 70.0 ± 0.8% and 35.5 ± 1.4%, for fCNCs and CNCs at the 3rd cycle. The Langmuir and Freundlich isotherms best match the experimental data, while the pseudo-first-order kinetic model provided the greatest fit to the kinetic data. Thus far, the results suggest that modified CNCs may be an alternative adsorption material for phenol removal in wastewater.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
