Abstract
Magnetic NiFe₂O₄ nanoparticles were successfully prepared via the coprecipitation process with ferric nitrate, nickel nitrate, and sodium hydroxide as raw materials, and they were characterized by the scanning electron microscopy (SEM), the transmission electron microscope (TEM), the X-ray diffraction (XRD), the vibrating sample magnetometer (VSM), the energy dispersive spectroscopy (EDS) and the Brunauer-Emmett-Teller (BET). The magnetic NiFe₂O₄ nanoparticles were employed to research the adsorption performance of reactive red 2BF (RR-2BF) onto them, and they revealed very large adsorption capacity of RR-2BF. The adsorption kinetics data were evaluated with the pseudo first-order, the pseudo second-order and the intraparticle diffusion models, and the results showed that the pseudo second-order kinetics model was best fitted for the adsorption of RR-2BF onto magnetic NiFe₂O₄ nanoparticles. While, the adsorption isotherm experiments were carried out at room temperature, and the experimental data conformed to the Langmuir model, which suggested that the adsorption of RR-2BF onto magnetic NiFe₂O₄ nanoparticles was the monolayer adsorption process. The magnetic NiFe₂O₄ nanoparticles revealed good reusability, and the adsorption capacity was maintained over 80% of the initial capacity after being used for five cycles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.