Abstract
Batch experiments were carried out under various adsorbent dosages, pH, contact time, and different metal ion concentrations. For fly ash before washing (BFA), under the optimum conditions of fly ash dosages of 4 g L−1 at pH 7, temperature at 303 K and contact time of 1 h, the removal of the Zn(II) was 8.3%. But for Fly ash after washing(AFA), under the optimum conditions of fly ash dosages of 4 g L−1 at pH equal to 4, temperature at 303 K and contact time of 1 h, the removal of the Zn(II) was 57.3%. For both adsorbents, the adsorption of Zn(II) ions onto fly ash followed the pseudo-second-order kinetics. The Langmuir isotherm model well fitted to BFA and AFA adsorbents for the adsorption of Zn(II) ions compared with other isotherm models shows the monolayer homogeneous adsorption on both the adsorbents. A high percentage of removal of Zn(II) ion observed at pH 4 for the adsorbent AFA. The maximum removal of about 91.43% of Zn(II) ions was obtained at pH 4.0 for adsorbent dose of 1 g/50 mL of 100 ppm metal ion compared with BFA which was only 20.77% at the pH 7.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
