Abstract
AbstractThe adsorption of chromium (III) onto activated carbon was investigated as a possible alternative method for its removal from aqueous solutions. The adsorption data were obtained in a batch adsorber and fitted the Langmuir adsorption isotherm well. The effect of pH on the adsorption isotherm was investigated at pH values of 2, 4, 5 and 6. It was found that at pH values below 2 the Cr(III) was not adsorbed and at pH values above 6.4 the Cr(III) was precipitated as Cr(OH)3. Maximum adsorption occurred at pH 5. The pH plays a very important role in the adsorption of Cr(III) since Cr(III) can form different complexes in aqueous solutions. The adsorption capacity was increased by about 20% as the temperature was raised from 25 to 40°C. It was concluded that Cr(III) is adsorbed to an appreciable extent on activated carbon and that the adsorption is highly dependent upon pH.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Chemical Technology & Biotechnology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
