Adsorption of Mercury from a Cyanide Leaching Solution Using Various Activation Rates of Granular Activated Carbon: A Laboratory- and Industrial-Scale Study

Abstract

The use of granular activated carbon (GAC) is a typical and sustainable technique for recovering precious metals from a cyanide leaching solution (CLS). The level of GAC activity is a fundamental factor in assessing the rate of precious metal adsorption; thus, it is essential to determine the efficiency of carbon elution for reproducing GACs. Since mercury (Hg) adsorption plays a critical role, economically and environmentally, in GAC efficiency, we conducted various laboratory and industrial experiments to explore the effect of different rates of GAC activation (10%, 35%, 70% and 100%) on Hg adsorption from CLS. Assessments of laboratory test results showed a direct relationship between the Hg adsorption and GAC activity; by increasing the GAC activity from 10% to 100%, the recovery of Hg was increased from 20% to 41%. Kinetic modeling results indicated that the Hg adsorption for all GAC activities followed chemisorption mechanisms. There was good agreement between the laboratory test results and the results of experiments on the industrial scale (that used a continuous circuit). These outcomes indicate that by increasing the frequency of carbon reactivation and using GAC with a high level of activity in the first tank, Hg desorption was meaningfully decreased and recovery was improved (for 10% GAC activity vs. 35% GAC activity, recovery was 40% vs. 90%, respectively).