Abstract

Acid mine drainage for Fe and Mn metals have a negative impact on the environment. This study studies the use of calcium oxide and fly ash as adsorbents, used to absorb Fe and Mn metals contained in acid mine drainage. This study aims to analyze the effectiveness of Calcium Oxide and fly ash as adsorbents, that an adsorbent of Fe and Mn metals in acid mine drainage. The method used is experimental with a laboratory scale, the test is carried out by adsorption using a batch system. Magnetic stirrer is used as a stirring medium in the adsorption process. Calcium oxide with various doses (0.1; 0.2; 0.3 grams) and fly ash with various doses (10; 14; 17 grams) were mixed with 250 ml acid mine drainage, then stirred at a speed of 150 rpm and (30; 60; 90 minutes) stirring time. The characterization of the adsorbent was carried out by SEM testing. The results show that fly ash adsorbent has a better adsorption effectiveness than calcium oxide. The effectiveness of Fe is 85.35% and Mn 78.14%. While calcium oxide has the effectiveness of Fe 72.91% and Mn 61.81%. SEM testing of holes that increase and enlarge after adsorption, as well as the filling of the cavity by the material indicates the success of the adsorption process.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.