Abstract
AbstractA zeolite-montmorillonite (zeolite-Mt) nano-adsorbent was prepared by calcination at 600°C. The synthesized nano-adsorbent was tested for removal of a toxic and cationic dye (crystal violet) from water, and it was characterized by various techniques. The effects of variables such as pH, temperature, adsorbent dosage and initial dye concentration on the removal efficiency of the dye were investigated by response surface methodology (RSM). Experimental conditions were optimized by RSM to achieve the maximum dye removal efficiency. Optimum conditions for maximum removal of dye were obtained at pH 9, temperature of 25°C, adsorbent dosage of 2 g L−1 and initial dye concentration of 40 mg L−1. Under these conditions, the maximum removal efficiency obtained was 99.9%. Various isotherms were applied to study adsorption equilibrium, and of these, the Freundlich isotherm provided the best fit. In addition, the fractal-like integrated kinetic Langmuir model was the most appropriate among several kinetic models. The thermodynamic parameters were also determined. The zeolite-Mt prepared under optimum conditions displayed a greater adsorption capacity than activated carbon (manufactured by Merck) and than various other adsorbents.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
