Abstract
Fibrous xonotlite was synthesized under the conditions of Na2SiO3 concentration of 0.05 mol·L-1, molar ratio of Si/Ca of 1:1, temperature of 220 °C and time of 9 h. It is worth pointing out that the Na2SiO3 solution as raw material was obtained from silicon residue through several procedures. The fibrous xonotlite exhibits excellent adsorption capacity for Congo red. 50 mL solution of Congo red with the concentrations of 100, 150 and 200 mg·L-1 can be almost completely adsorbed by 30 mg of fibrous xonotlite within 10 min, and the adsorption ratios are 94.05%, 95.50% and 94.14%. The Langmuir model describes the adsorption well, indicating the adsorption is monolayer. The adsorption kinetics follows the pseudo-second-order model. The calculated maximum adsorption capacity of fibrous xonotlite for Congo red is 574.71 mg·g-1 at room temperature. Fibrous xonotlite is a potential efficient adsorbent for Congo red owing to its rapid adsorption, high adsorption capacity and regeneration capacity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Water science and technology : a journal of the International Association on Water Pollution Research
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.