Abstract
The goal of our research is developing an efficient and cost-effective carbonaceous CO2 sorbent. Using petroleum coke as the precursor, porous nitrogen-doped carbons were prepared by combining ammoxidation with KOH activation. The as-synthesized samples possess highly developed microporosities and large nitrogen loadings. High CO2 adsorption capacities of 3.76–4.57 mmol/g at 25 °C and 5.80–6.62 mmol/g at 0 °C under atmospheric pressure were achieved. Specifically, the sample prepared under mild temperature (650 °C) and low KOH/precursor ratio (KOH/precursor = 2) shows a CO2 uptake of 4.57 mmol/g at 25 °C, among the highest achieved for nitrogen-doped porous carbons. This high CO2 capture capacity can be attributed to the synergistic effect of nitrogen doping and high narrow microporosity of the sorbent. However, experimental evidence suggests that nitrogen doping contributes less than narrow microporosity. Additionally, the CO2/N2 selectivity and CO2 heats of adsorption of the sorbent are as high as 22 an...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.