Abstract
Arsenite (As(III)) is toxic in drinking water, which becomes an environmental concern worldwide. This work was to synthesize porous hematite through the calcination of natural goethite concentrate for As(III) adsorption, including adsorption kinetics, isotherms and the influence of pH and temperature. The calcination was performed at 300 °C for 180 min, producing porous hematite with large amount of micropores. The maximum adsorption capacity of As(III) on porous hematite was achieved at pH 6.0 and 25 °C, about 14.46 mg g−1, compared with 2.965 mg g−1 on the original goethite concentrate. The improvement might be attributed to the formation of micropores and thus the increase in the surface area. Also, it was found that the adsorption was strongly pH dependent and reduced with increasing temperature. It is indicated that the low-cost porous hematite has great potential in As(III) removal from contaminated water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.