Abstract
The present work was broadly divided into two parts: first, the efficiency of synthetically prepared ferrihydrite and Al-ferrihydrite to adsorb dissolved organic matter (DOM) was tested as a function of time, pH and ionic strength and its effects on specific surface area was found. In the second part, the effect of DOM concentration and solution pH was studied to elucidate the influence of this two parameters on As(V) leachability from As(V) loaded ferrihydrite and Al-ferrihydrite. It was found that both pH and ionic strength had significant influence on DOM adsorption. The behavior and magnitude of adsorption was significantly different for both the materials. In general, the efficiency of Al-ferrihydrite to adsorb DOM was better compared to ferrihydrite. Results indicated that ligand exchange was the dominant interaction mechanism for DOM adsorption on ferrihydrite and Al-ferrihydrite. The study also suggested a strong potential for DOM to mobilize As(V) from the studied materials. At pH 5.0, DOM concentrations of 2.5 and 5.0 mg C/L had negligible effect on As(V) leachability. With increasing DOM concentration from 10 to 30 mg C/L, increased the As(V) leachability into the solution. Net release from ferrihydrite was up to 1.07 mg/g (5.75%) of the total adsorbed arsenic. The corresponding figure for Al-ferrihydrite was 1.47 mg/g (6.30%). As the primary mechanisms for the arsenic release from solid phases we identified two different types of mechanisms i.e., dissolution of the solid phase and competition between arsenic and organic anions for sorption sites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have