Abstract
Low adsorption capacity of natural clay minerals is a key technical and economical issue which limits their industrial application as low cost absorbents for removal of hazardous contaminants from wastewater. Herein, natural bentonite was modified by thermal activation (TA), acid activation (AA) and combined acid and thermal activation (ATA). In this study, we studied how the key operational parameters: contact time, dye concentration, bentonite dosage, pH and temperature could affect the adsorption performance for the removal of Congo red (CR). The thermodynamic parameters revealed that adsorption reaction using the modified clays is spontaneous and exothermic. The experimental data were analyzed by Langmuir and Freundlich isotherm, Pseudo-kinetic and particle diffusion models. The results revealed that Freundlich isotherm provided a better fit to the experimental data. The adsorption kinetics followed both the pseudo first and second-order rate equations, while the second order giving a better fit. The adsorption process also showed a intra-particle diffusion mechanism. The ATA bentonite demonstrated the highest adsorption capacity by removing over 95% of CR and its adsorption fitted best to all models.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.