Abstract
A cellulose/chitosan hydrogel bead was prepared by extruding and regenerating the blends from ionic liquid 1-ethyl-3-methylimidazolium acetate ([Emim]Ac) in ethanol. FT-IR, scanning electron microscopy (SEM) and X-ray powder diffraction techniques were used to prove the successful blending of both natural polymers (cellulose and chitosan). Brunauer–Emmet–Teller surface area and pore diameter analysis showed that the beads were nanoporous with pores measuring from 10 to 20 nm. Batch adsorption experiments demonstrated that the bead had a maximum adsorption capacity of 40 mg/g for congo red (CR) dye removal from aqueous solutions, which was more efficient than the most reported natural biosorbents. The CR adsorption capacity at equilibrium was related to initial CR concentration, dosage of beads and pH values of the CR solution. When the initial concentration of CR was 30 mg/L, and the adsorbent dosage was 2.0 g/L, the equilibrium of adsorption was reached within 115 min with the removal rate of 89.6%. The Langmuir model represented the adsorption isotherm data and the experimental results followed a pseudo-second-order rate model, indicating that intraparticle diffusion dominated the adsorption process. The cellulose/chitosan hydrogel beads can be used as an efficient adsorbent for dye contaminant removal from wastewater.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.