Abstract

The process of flocculation of a calcium-magnesium solid phase formed in an aqueous-salt solution with the introduction of calcium-containing precipitants using polyacrylamide, cationic and anionic acrylamide copolymers was studied. With the introduction of polymers, an increase in the dispersion settling rate was observed in the concentration range of 0.5–3.0 mg/g, to a greater extent for the anionic copolymer. In the presence of an amine-containing surfactant, the sedimentation rate increased with the introduction of polymers by a factor of 1.1–1.3 compared to dispersions without surfactants. Using an anionic copolymer as an example, it was shown that the adsorption of amine and the sedimentation rate of dispersion increase with the increase of the polymer molecular weight. It was found that the concentration of the anionic copolymer and the pH of the medium also influence the adsorption of amine. Based on the obtained data, an effective method of water-salt solutions purification from amine-containing surfactants and magnesium salts (purification degree 99.5–99.8 %) that can be used at mining and processing enterprises was developed.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call