Abstract
PurposeChemical and electrochemical measurements were used to study the corrosion inhibition of aluminium in distilled water using one of pyridine derivatives as corrosion inhibitor.Design/methodology/approachCorrosion inhibition of aluminum in distilled water was investigated in the absence and presence of different concentrations of 2,6-di methyl pyridine (DMP). Potentiodynamic polarization, open circuit potential and Fourier Transform Infrared Spectroscopy were employed.FindingsInhibition efficiency of 86 per cent is reached with 0.0187 M of DMP at 25°C. Potentiodynamic polarization showed that DMP behaves as mixed type inhibitor. The inhibitor obeyed the Langmuir adsorption isotherm. The value of ΔG°ads suggests physico-chemical adsorption of the inhibitor molecule on the aluminium surface.Originality/valueThis paper indicates DMP could be used as corrosion inhibitor to prevent the corrosion of aluminium in in distilled water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.