Adsorbent biochar derived from corn stalk core for highly efficient removal of bisphenol A.

Abstract

Environmental-friendly biochar (BC) with low cost was obtained by simple pyrolysis of corn stalk core, which was employed as an adsorbent for efficiently removing organic pollutants in water. The physicochemical properties of BCs were characterized by various techniques, including X-ray diffractometer (XRD), Fourier transforms infrared (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectrometer (XPS), Raman, Thermogravimetric (TGA), N2 adsorption-desorption and zeta potential tests. The influence of pyrolysis temperature on the structure and adsorption efficiency of the adsorbent was emphasized. The graphitization degree and sp2 carbon content of BCs were enhanced by increasing the pyrolysis temperature, which was favorable for the enhancement of the adsorption efficiency. The adsorption results showed that corn stalk core calcined at 900°C (BC-900) displayed exceptional adsorption efficiency toward bisphenol A (BPA) in wide pH (1-13) and temperature (0-90°C) ranges. Moreover, adsorbent BC-900 could adsorb various pollutants from water, including antibiotics, organic dyes, and phenol (50mg·L-1). The adsorption process of BPA over BC-900 matched well with the Langmuir isotherm and pseudo-second-order kinetic model. Mechanism investigation suggested that large specific surface area and pore filling acted the foremost role in the adsorption process. Adsorbent BC-900 has the potential application in wastewater treatment due to its simple preparation, low cost, and excellent adsorption efficiency.