Abstract
An adjoint approach for the shape design sensitivity analysis of plane elasticity problems with a direct boundary integral equation formulation is presented. The objective function or the constraint function is expressed in an integral form and augmented by incorporating the elasticity equations via adjoint functions. The variation of the augmented function is taken by performing its material derivative to obtain the sensitivity of the objective function or the constraint function. The adjoint functions are obtained through the solution of the adjoint problem resulting from setting the local variations of the displacement, velocity, and traction fields equal to zero. An approximate procedure for the application of concentrated adjoint load in the boundary element framework is suggested. This allows the computation of displacement, traction, and stress sensitivities at discrete nodal points. The requirement of choosing an averaging characteristic function in earlier formulations is obviated by this development. The present formulation includes the treatment of body forces in sensitivity calculations. A series of numerical examples is solved to demonstrate the validity of the present approach.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.