Abstract

Abstract In this study, polyols recycled from decomposed polyurethane (PU) foam wastes were used in preparing adhesives for plywood manufacturing. A polyol was made from chemically decomposed flexible PU foam wastes separated from automobile shredder residue. The recycled polyol was mixed with a commercial polyol at weight ratios of 100/0, 25/75, 50/50, 25/75, and 0/100, respectively. These polyol mixtures were mixed, respectively, with polymeric methylene diphenyl diisocyanate at isocyanate group–to–hydroxyl group (NCO/OH) molar ratios of 1.0, 1.25, and 1.5 to prepare adhesives. The recycled polyol and adhesives were characterized by Fourier transform infrared spectroscopy. Plywood specimens bonded by the adhesives were fabricated and tested. The effects of NCO/OH molar ratio and recycled polyol–to–commercial polyol weight ratio on adhesive gel time and bonding strength before and after water treatments were evaluated. The adhesives prepared from recycled polyol presented shorter gel time and greater dry...

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.