Abstract
Thermal modification of wood changes its chemical, physical, and structural properties, which may affect adhesive bondline quality and bonding performance. This research compared the effect of thermal modification on the adhesive bonding performance of poplar (Liriodendron tulipifera) wood. Samples were prepared from thermally modified and unmodified yellow poplar using one-component polyurethane (PUR) and polyvinyl acetate (PVA), as they are adhesives used in wood products. Microscopic properties of the bondlines were investigated to understand shear performance and durability. Adhesive line thickness, penetration, shear strength, and moisture durability were measured, and failure modes were recorded. Thermal modification negatively affected the wood and adhesive interaction by reducing penetration (31.2% in PUR and 29% in PVA), therefore creating a thicker adhesive line (70% in PUR and 2% in PVA) and consequently causing a significant reduction in the shear strength of both adhesive types (27% in PUR and 36% in PVA) compared with non-modified specimens. The PUR adhesive had higher shear strength than PVA by 2.7% in non-modified and 14% in thermally modified wood.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
