Abstract
Laser surface texturing and micro-arc oxidation provide excellent approaches to enhance the adhesion strength and anti-corrosion performance of adhesive bonding interfaces in aluminum alloys, which can be applied in the field of automotive light weighting. Herein, micro-arc oxidation coatings were fabricated on the laser-textured aluminum surface under the voltage of 500 V for various treatment times (5 min, 15 min, 30 min, 60 min). The anti-corrosion performance of ceramic coatings on the laser-textured surface was analyzed using electrochemical measurements. The results of electrochemical measurement indicate that the coating on the sample surface presents two time constants corresponding to a dual-layer structure. The sample grown under 500 V for 60 min exhibits excellent protective performance with a value of 1.3 × 107 ohm·cm2. The adhesion strength of laser-textured ceramic coating is improved compared with the as-received substrate. The sample treated with 500 V for 30 min exhibits the highest bonding strength with a value of 52 MPa. The wider pores and bulges for the sample grown in 60 min would introduce microcracks and consequently reduce the adhesion strength.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
