Adhesion and tear energy of a long-term soft lining material activated by rapid microwave energy

Abstract

Statement of Problem. Construction of dentures with permanent soft linings is time-consuming in the laboratory and extra costs are related to equipment and materials used. Purpose.The purpose of this in vitro study was to determine whether using microwave energy to activate the polymerization of a silicone rubber denture soft lining material affected its properties. Material and Methods. Tear energy and adhesive properties were measured in a tensile testing machine by using a pants leg tear test and peel specimens. Tear energy was measured for specimens polymerized conventionally (control) and for 3, 5, and 10 minutes in a microwave. Data were analyzed with one-way analysis of variance and a two-sample Student t test. Results. The multiple comparison test failed to show a significant difference in tear energy between 3 minutes microwave activation and conventional heat curing. However, 3 minutes microwave activation revealed a significantly stronger material when compared with 5 minutes and 10 minutes ( p < 0.05). Application of a two-sample Student t test failed to demonstrate a significant difference between microwave energy and conventional heat activation groups in the adhesion test. In adhesion testing, all specimens presented cohesive failure. Conclusions. This method of polymerization does not compromise the strength of a soft lining material and its adhesion to polymethyl methacrylate. This study suggests the use of 3 minutes 650W microwave energy for processing a silicone soft lining material. (J Prosthet Dent 1998;79:182-87.)