Additively manufactured low-gradient interfacial heterostructured medium-entropy alloy multilayers with superior strength and ductility synergy

Abstract

Metallic additive manufacturing (AM) offers near net-shape fabrication but often results in insufficient strength and/or ductility due to voids or cracks, coarse initial crystalline microstructure, insufficient volume fraction of precipitates and yet post-AM strengthening/toughening methods non-destructive to shape are generally lacking. Here, we report a laser-directed energy deposited (L-DED) medium entropy alloy (MEA) with a heterostructure (HS) comprising alternate layers of solid-solution and intermetallic-dispersed MEA that possess ultimate tensile strength of 1132.8 MPa and elongation of 50.6 %, corresponding to strength-ductility synergy higher than other medium- or high-entropy alloys reported. The multilayers were produced from a dual source of CoCrNi MEA powder and a powder mixture of the same MEA, Al and Ti with stoichiometry (CoCrNi)86Al7Ti7, and the remarkable strength-ductility synergy is achieved only after post-L-DED heat treatment, which causes Al and Ti to diffuse across the layers to form a low-gradient HS. The significant back stress due to the HS contributes to the high strength, while the high ductility results from a high strain-hardening rate suppressing necking. This study demonstrates the concept of using AM not just as a near net-shape fabrication method but also a unique tool to produce low-gradient HSs with superb mechanical properties, via the use of multiple powder sources combined with suitable shape-preserving post-fabrication heat treatment.