Additive manufacturing of ULTEM 9085: Weak interface-enriched multi-toughening mechanisms and fracture resistance optimization

Abstract

Modulating the fracture toughness can be used to tailor or enhance the mechanical performances in the design of specific additively-manufactured engineering structures. In this research, we explored the fracture behavior of ULTEM 9085 materials fabricated by material extrusion (MEX) 3D printing technique, with a particular emphasis on the effect of weak interfaces between deposited beads. Under quasi-static bending condition, the MEX-fabricated ULTEM 9085 exhibits brittle and quasi-brittle fracture behaviors by adjusting the print orientations and raster angles. Several intrinsic toughening mechanisms are identified, including crack deflection and twisting, fibril bridging, constrained microcracking and delamination of the weak interface. Notably, the samples that experienced delamination along the weak interface displayed the highest performance in terms of the fracture toughness. To achieve high fracture toughness, we employed an analytical model based on linear elastic multilayers fracture mechanics to understand the crack onset and predict the crack propagate orientation. Based on the insight gained from this model, we proposed an intuitive optimal strategy to enhance the fracture resistance by fine turning the bonding strength and layer height to trigger the crack deflecting towards and propagating at the weak interface consistently. By implanting this approach, we achieved an increase of over 35% in fracture resistance while effectively preventing the catastrophic failure, demonstrating exceptional fracture-resistant performance. Overall, our study elucidates the impact of layer-by-layer MEX-induced weak interfaces on the fracture resistance of MEX-fabricated high temperature engineering materials. The findings of this research hold potential for engineering applications, particularly in optimizing the design of additive manufactured products aiming at high fracture resistant.