Abstract
Obtaining a highly homogeneous magnetic field is desired for field‐controlled applications. For example, the resolution of magnetic analysis methods can be improved by generating a stronger and more homogeneous field over the region of interest (ROI). A set of 3D‐printed passive shims is fabricated using additive manufacturing to improve the magnetic field homogeneity of a Halbach magnet assembly. The feedstock is a custom acrylonitrile butadiene styrene (ABS)‐hard magnet composite filament filled with 60% wt. isotropic NdFeB. Additionally, a method for investigating the remanence is developed and validated. The result reveals a good agreement between the new method and existing measurement techniques for the remanence of permanent magnets. It is also shown that the additive manufacturing procedure has negligible effects on the magnetic properties. Performing a parametric study over a rectangular ROI, an optimized shim configuration is achieved. In the optimized and 3D‐printed configuration, the average norm of the magnetic flux density, Bnorm, is increased by 13% and, more importantly, a 43% increase in the magnetic uniformity is obtained. These results highlight the great potential of freeform manufacturing, namely, additive manufacturing, to tailor the properties of magnet structures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.