Addition of rhenium (Re) to Pt-Ru/f-MWCNT anode electrocatalysts for enhancement of ethanol electrooxidation in half cell and single direct ethanol fuel cell

Abstract

Pt-Ru and Pt–Re and Pt-Ru-Re nanoparticles supported on functionalized multi-walled carbon nanotubes (f-MWCNT) were synthesized via modified polyol reduction method and tested thoroughly in a half cell and single direct ethanol fuel cell for ethanol electrooxidation in acidic medium. The MWCNTs were functionalized in a mixture of HNO3/H2SO4 solution for depositing a more active metal alloy nanoparticle on support material. The alloy formation of bi-metallic and tri-metallic electrocatalysts were examined by XRD analysis and more clearly explained by FE-SEM element mapping. The TEM analyses reveal that electrocatalysts nanoparticles are well dispersed on f-MWCNT, with spherical shapes and nano sizes range of 1.5–4 nm. The electrochemical analyses by cyclic voltammetry and chronoamperometry measurements reveal that tri-metallic electrocatalyst Pt-Ru-Re (1:1:0.5)/f-MWCNT exhibits the highest electrocatalytic activity and stability towards ethanol electrooxidation among all the synthesized electrocatalysts. The same electrocatalyst as anode in single DEFC results in excellent performance in comparison to all other synthesized electrocatalysts, with a maximum power density of 9.52 mW/cm2 at a cell temperature of 30 °C. The bi-metallic Pt-Ru (1:1)/f-MWCNT and Pt–Re (1:1)/f-MWCNT produced power density of 7.48 mW/cm2 and 4.74 mW/cm2 at room temperature of 30 °C. The power density of DEFC enhanced 2.44 times, when cell operating temperature was increased from 30 °C to 80 °C using anode electrocatalyst Pt-Ru-Re (1:1:0.5)/f-MWCNT and keeping other parameters constant. The best result obtained in half cell and single DEFC using Pt-Ru-Re (1:1:0.5)/f-MWCNT electrocatalyst may be attributed to the synergistic effect of Pt, Ru and Re combined with bi-functional and ligand effects.