Adaptive state of charge estimation for lithium‐ion batteries using feedback‐based extended Kalman filter

Abstract

AbstractThe battery management system (BMS) is a crucial component of electric vehicles (EVs) owing to its sustainable operation. To ensure optimal performance of the BMS, state of charge (SOC) of the equipped battery is required to be effectively and accurately estimated. In this paper, the authors consider high‐order equivalent circuit model (ECM) to capture the dynamic characteristics of lithium‐ion batteries, which are connected in series with internal resistance by 2‐RC networks. The parameters of the RC network are determined by mathematically solving the working conditions of the two states. Moreover, the parameters of the battery can be derived by hybrid pulse power characterization (HPPC) tests. Then, based on the open‐circuit voltage, the proposed feedback‐based extended Kalman filtering (FEKF) algorithm is established. The parameters from the simulation have shown that the highest error is 0.0306 V, the optimal knowledge of which can improve the SOC estimation approach remarkably and can provide a reference value. Afterwards, the non‐linear predicting and corrective techniques are applied to the experiment in the extended calculation process. The original error is reduced by the FEKF algorithm, where the maximum and average errors are 0.0298 and 0.0240 V, respectively. Consequently, the established high‐order ECM utilizing the FEKF algorithm may provide SOC estimation with an error of 1.5% or less, resulting in superb performance from the lithium‐ion battery pack.