Adaptive output-feedback control for switched nonlinear systems with measurement sensitivity based on double-side event-triggering mechanisms

Abstract

This article concentrates on the problem of adaptive event-triggered control with double-side event-triggering mechanisms for a family of switched nonlinear systems with measurement sensitivity. In order to circumvent the negative effect of intermittent transmission and sensor measurement sensitivity on the output, an extended system is constructed by introducing a first-order output filter. Then, an input-driven neural switched observer is designed to estimate unmeasurable system states. To deal with the mutual interaction between the triggering and the switching mechanisms and their negative effect on the positive lower bound of inter-execution intervals, an incremental compensation is incorporated in the event-triggering mechanism (ETM) at the output sensor side. At last, a novel event-triggered control scheme built on both sides of the controller and output is proposed, which exhibits superior efficacy compared to the one-side event-triggered control scheme. By using the methods of the average dwell time (ADT) and the backstepping design, it is guaranteed that all signals of the switched closed-loop system are semiglobally uniformly ultimately bounded (SGUUB), and the Zeno phenomenon is excluded. The efficacy of the proposed methodology is validated by using a numerical simulation and a one-link robot system.