Abstract
The two major obstacles toward high-capacity indoor wireless networks are distortion due to the indoor channel and the limited availability of bandwidth which necessitates a high spectral efficiency. A combined orthogonal-frequency division multiplexing/spatial-diversity multiple access (OFDM/SDMA) approach can effectively tackle both obstacles. The channel distortion due to multipath propagation is easily mitigated with OFDM while the bandwidth efficiency can be increased with the use of SDMA. In order to keep the network's cost acceptable, simplified SDMA processors are preferred over the exponentially complex optimal maximum-likelihood processors. However, these simplified processors perform significantly worse than the optimal ones in terms of average bit error rate (BER). In this paper, we show that by adapting the constellation sizes applied on the individual subcarriers to the channel conditions, the performance of OFDM/SDMA processors can be significantly enhanced. In the uplink, we derive simple closed-form equations for the optimal constellation sizes for both a simple linear minimum mean-square error (MMSE) detector and for a nonlinear MMSE decision feedback equalizer (DFE) detector. Furthermore, for each detector, we introduce a simplified loading algorithm which lowers the computational and signaling complexity substantially at a small performance penalty. In the downlink, we study the dual precoders of the uplink detectors, respectively, the linear MMSE precoder and the nonlinear Tomlinson-Harashima (TH) MMSE-based precoder. For both precoders, we derive expressions for the optimal and the simplified constellation sizes. Additionally, we show that in time-division duplexing systems, the constellation distribution of a set of dual detectors/precoders is identical for up- and downlink, which effectively halves the computational complexity of adaptive loading. In the fully loaded uplink, the proposed adaptive loading algorithm results in a gain of 9 dB for a BER=10/sup -3/ for the linear MMSE detector and a gain of 4.5 dB for the nonlinear MMSE-DFE detector. In the fully loaded downlink, a gain of 6.3 dB is achieved for the MMSE precoder and 5.5 dB for the TH-MMSE precoder.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have