Adaptive Control for Suspension System of In-Wheel Motor Vehicle with Magnetorheological Damper

Abstract

Listen

Translate article

This study proposes two adaptive controllers and applies them to the vibration control of an in-wheel motor vehicle’s (electric vehicle) suspension system, in which a semi-active magnetorheological (MR) damper is installed as an actuator. As a suspension model, a nonlinear quarter car is used, providing greater practical feasibility than linear models. In the synthesis of the controller design, the values of the sprung mass, damping coefficient and suspension stiffness are treated as bounded uncertainties. To take into account the uncertainties, both direct and indirect adaptive sliding mode controllers are designed, in which the principal control parameters for the adaptation law are updated using the auto-tune method. To reflect the practical implementation of the proposed controller, only two accelerometers are used, and the rest of the state values are estimated using a Kalman observer. The designed controller is applied to a quarter car suspension model of an in-wheel motor vehicle featuring an MR damper, followed by a performance evaluation considering factors such as ride comfort and road holding. It is demonstrated in this comparative work that the proposed adaptive controllers show superior control performance to the conventional proportional–integral–derivative (PID) controller by reducing the vibration magnitude by 50% and 70% for the first and second modes, respectively. In addition, it is identified that the second mode (wheel mode) of the in-wheel motor vehicle is more sensitive than the first body mode depending on the mass ratio between the sprung and unsprung mass.