Adaptive Constant Power Control of MHz GaN-Based AC/DC Converters for Low Power Applications

Abstract

With offline single-phase power supplies moving toward the megahertz switching frequency range, the converter's bus capacitor becomes the bottleneck of further improvement of power density. Partial constant power operation is effective in reducing the bus capacitance and capacitor current stress for low-power applications. However, its impact on circuit design and operation design has not been studied thoroughly. With the developed circuit operation and loss model, this paper presents design considerations and power loss analysis of megahertz ac/dc converters in partial constant power operation. An adaptive constant power control is also proposed, based on the developed models, to improve the light-load efficiency and power factor. A 65 W, megahertz critical conduction mode GaN-based ac/dc converter prototype has been developed to validate the analysis and circuit operation method. Compared with power factor correction (PFC) operation, partial constant power control exhibits an efficiency drop of less than 1%. However, a 50% reduction of bus capacitance can be realized. With the proposed adaptive constant power control, the light-load efficiency and power factor can be improved to be a level similar to the PFC operation. This paper ends with a discussion of the possibility of extending the proposed operation method to higher power applications.