Abstract

<p>The biggest concern in the use of radio-over-fiber (ROF) links in wireless access is their limited dynamic range due to nonlinear distortion (NLD). In this paper, a higher order adaptive filter based nonlinearity compensation scheme is proposed. Pre-compensation is done for the downlink while post-compensation is done for the uplink to result in asymmetry with respect to complexity. Thiscentralized signal processing is attractivein thatit keeps the remote unit simple. Accurate measurements of ROF link parameters are not required with this approach because the filters are adapted from the distortion of the input/output base band signal. This technique also facilitates fast tracking of modifications and drifts in the link characteristics. Measurements and simulation results show that gradually saturating amplitude nonlinearity can be adequately linearized with some backoff from the clipping limit. A 42% backoff is required for pre-compensation to protect the laser while only a 16.7% backoff is required for post-compensation. Phase pre-compensation is accomplished with a higher accuracy than phase post-compensation.</p> <p><br></p>

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.