Adapting Tension Leg Technology to Provide an Economical Solution for Floating Wind Power

Abstract

Abstract The development of floating offshore wind farms requires the parallel development of suitable floaters to support the wind turbines. These floaters must be economic and must also exhibit good motion characteristics to limit the accelerations and inclinations imposed on the turbines during operation. This paper reviews the required characteristics of these floaters, addressing the requirements of fabrication, turbine integration, tow to site, and offshore installation, as well as the required behavior of the floater once installed. The benefits of an integrated design approach considering all of the above is demonstrated, and consideration is given to the industrialization of the production process for large numbers of floaters for full-scale wind farms. Based upon this review of requirements, an innovative light weight structural solution incorporating tensioned mooring legs has been developed as an economic solution for the floater. The modularity of the design facilitates construction, and offshore installation can be accomplished using standard anchor handling vessel (AHV) means. The floater design exhibits low turbine inclinations and low accelerations due to a combination of its mooring arrangement and its high degree of transparency to waves, which reduces fatigue loads and maintenance issues on the turbine. The floater behavior during towing to site and in the installed condition is described, and key performance characteristics are reported based on analytical simulations and model tests results conducted at 1:40 scale. The paper seeks to clarify the key factors to be considered in developing a floater to support a wind turbine, and to propose a solution that achieves good motion characteristics whilst satisfying the economic constraints of wind farm development.