Abstract
Granular activated carbon (GAC) has proven to be a successful technology for per- and polyfluoroalkyl substances (PFAS) removal from contaminated drinking water supplies. Proper design of GAC treatment relies upon characterization of media service-life, which can change significantly depending on the PFAS contamination, treatment media, and water quality, and is often determined by fitting descriptive models to breakthrough curves. However, while common descriptive breakthrough models are favored for their ease-of-use, they have a significant shortcoming in that they are not able to properly fit PFAS desorption in competitive sorption scenarios. The present work adapts three common descriptive models to fit competitive PFAS breakthrough curves from a GAC pilot study. The adapted and original models were fit to the experimental breakthrough curves for 12 common PFAS and evaluated using adjusted R2 and reduced χ2 values. This study found that the novel adaptation of the common descriptive models successfully accounted for desorption of PFAS compounds from the GAC, accurately describing increased exposure risks due to elevated effluent levels during desorption without significantly increasing the complexity of implementing the models.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.