Abstract
Zeolites differing in structure and acidity were tested in liquid phase acylation of p-xylene. Hexanoyl chloride, propionic anhydride and isobutyric anhydride were used as acylating agents. The highest conversions of acylating agent were achieved over large pore zeolites USY (66.3%) and Beta (58.2%). It was found that acylation of p-xylene proceeds only over large pore zeolites Beta and USY. Selectivities to monoacylated p-xylene obtained over USY zeolite decreased in the order: propionic anhydride 78.0% > hexanoyl chloride 67.2% > isobutyric anhydride 33.1%. Diacylated product was formed over zeolite USY with all acylating agents tested but only with hexanoyl chloride over zeolite Beta. It was found that the optimum Si/Al ratio of zeolite Beta for p-xylene acylation with propionic anhydride is 25, while for isobutyric anhydride is 19. Conversion of isobutyric anhydride decreased with increasing isobutyric anhydride concentration and increased with increasing amount of catalyst.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
