Abstract
To evaluate mechanical property changes after endovascular stent placement in small-diameter arteries. Self-expanding stents (Wallstent) were placed in the infrarenal aorta of five New Zealand White rabbits via a surgical right femoral approach. Blood pressure changes (deltaP) were monitored in the aorta. Blood flow velocity was measured with a 20-MHz, pulsed Doppler probe (n = 4) to calculate the pulsatility index. Aortic diameter (dA) and diameter changes (delta(d)) were measured with a 20-MHz probe in echo-tracking mode. Diameter compliance (Cd) and distensibility coefficient (DC) were calculated as Cd = 2(delta)d/(delta)P and DC = 2delta(d)/delta(P)/dA. Aortic diameter increased from 3.360 +/- 0.4033 mm to 4.020 +/- 0.3033 mm after stent placement at the stent level only. Compliance decreased from 77.644 +/- 24.306 mm kPa(-1) to 31.150 +/-8.245 x 10(-3) mm kPa(-1) at the stent level, and was then significantly lower than upstream (98.500 +/- 53.196 mm kPa(-1)) and down-stream (59.047 +/- 13.833 mm kPa(-1)). There was no significant change in pulsatility index. Endovascular stent placement produces a significant decrease in arterial wall compliance of the rabbit abdominal aorta.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
