Abstract
This paper takes a graduate workshop in shenyang as the research object, and uses Airpak software to conduct numerical simulation analysis on the air distribution and thermal comfort of the fan coil side air supply mode in winter. The measured air supply temperature is 25°C, air supply speed in the x direction for 0.8m / s, 1.5m / s and 2.3m / s three gears, from east to west up to back air supply 3mode. With the increase of air supply speed, the temperature of the working area gradually increases, and the wind speed increases. PMV index and PPD index were used to evaluate the indoor comfort under the three air supply speeds. The air sup 3ply speeds of 1.5m/s and 2.3m/s can meet the requirements of indoor comfort. According to the distribution of personnel, 18 measuring points were set for measurement. The comparison between the simulation results and the measured results showed a consistent trend, which verified the feasibility and accuracy of Airpak for indoor thermal environment comfort analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have