Active pressure on gravity walls supporting purely frictional soils

Abstract

The active earth pressure used in the design of gravity walls is calculated based on the internal friction angle of the retained soil or backfill. However, the friction angle of a soil changes during the deformation process. For drained loading, the mobilized friction angle varies between the peak and critical-state friction angles, depending on the level of shear strain in the retained soil. Consequently, there is not a single value of friction angle for the retained soil mass, and the active earth pressure coefficient changes as the wall moves away from the backfill and plastic shear strains in the backfill increase. In this paper, the finite element method is used to study the evolution of the active earth pressure behind a gravity retaining wall, as well as the shear patterns developing in the backfill and foundation soil. The analyses relied on use of a two-surface plasticity constitutive model for sands, which is based on critical-state soil mechanics.