Abstract

Active power control regulates the total power generated by wind farms with the power consumed on the electricity grid. Due to wake effects, the available power is reduced and turbulence is increased at downstream wind turbines. Such effects lead to a design challenge for wind farm control, where the delicate balance between supply and demand should be maintained, while considering the load balancing in the wind turbine structures. We propose a control architecture based on simple feedback controllers that adjusts the demanded power set points of individual wind turbines to compensate for turbine saturations and to balance thrust forces. For compensation purposes, the dynamics of power tracking in the wind turbines is approximated as a pure time-delay process, and the thrust force balance design is based on an identified linear model of the turbines. In this paper, we show that the proposed control architecture allows the generated power to track its reference even when turbines saturate, while the thrust forces are balanced. In addition, the result shows that the proposed power dispatch strategy, which considers thrust force balance, also avoids turbine saturation, being thus beneficial for energy production. The effectiveness of the proposed feedback controller is demonstrated using high-fidelity computational fluid dynamics simulations of a small wind farm.

Highlights

  • As wind energy is an emerging renewable source in the world’s energy portfolio, wind farm control systems play an ever more prominent role in the electricity grid

  • We present a control architecture based on simple feedback controllers that adjusts turbine power set points to compensate turbine saturation, a simplification of the approach of [3], where pure time-delay process is considered

  • We demonstrate that considering the thrust forces, structural loads are alleviated in an aggregate manner, and the trade-off between demanded and available power is improved

Read more

Summary

INTRODUCTION

As wind energy is an emerging renewable source in the world’s energy portfolio, wind farm control systems play an ever more prominent role in the electricity grid. Van Wingerden et al [12] present a simple feedback controller that significantly improves the tracking behavior of the total power output of the farm in a large-eddy simulation. The controller compensates the wake effects (wind lulls) that may occur in one part of the farm, but saturation is not studied Another challenge driven by the effects of the upstream turbines is related to the induced structural loads [13], [14]. We present a control architecture based on simple feedback controllers that adjusts turbine power set points to compensate turbine saturation, a simplification of the approach of [3], where pure time-delay process is considered.

Power tracking with wind turbine controller
Thrust force signals
WIND FARM LEVEL
Compensation of turbine saturation design
Thrust balancer design
SIMULATIONS
Model Identification
Power tracking and thrust force balance
Findings
CONCLUSIONS
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call