Abstract

Due to its adverse impact on health, as well as its global distribution, long atmospheric lifetime and propensity for deposition in the aquatic environment and in living tissue, the US Environmental Protection Agency (US EPA) has classified mercury and its compounds as a severe air quality threat. Such widespread presence of mercury in the environment originates from both natural and anthropogenic sources. Global anthropogenic emission of mercury is evaluated at 2000 Mg year−1. According to the National Centre for Emissions Management (Pol. KOBiZE) report for 2014, Polish annual mercury emissions amount to approximately 10 Mg. Over 90% of mercury emissions in Poland originate from combustion of coal.The purpose of this paper was to understand mercury behaviour during sub-bituminous coal and lignite combustion for flue gas purification in terms of reduction of emissions by active methods. The average mercury content in Polish sub-bituminous coal and lignite was 103.7 and 443.5 μg kg−1. The concentration of mercury in flue gases emitted into the atmosphere was 5.3 μg m−3 for sub-bituminous coal and 17.5 μg m−3 for lignite. The study analysed six low-cost sorbents with the average achieved efficiency of mercury removal from 30.6 to 92.9% for sub-bituminous coal and 22.8 to 80.3% for lignite combustion. Also, the effect of coke dust grain size was examined for mercury sorptive properties. The fine fraction of coke dust (CD) adsorbed within 243–277 μg Hg kg−1, while the largest fraction at only 95 μg Hg kg−1. The CD fraction < 0.063 mm removed almost 92% of mercury during coal combustion, so the concentration of mercury in flue gas decreased from 5.3 to 0.4 μg Hg m−3. The same fraction of CD had removed 93% of mercury from lignite flue gas by reducing the concentration of mercury in the flow from 17.6 to 1.2 μg Hg m−3. The publication also presents the impact of photochemical oxidation of mercury on the effectiveness of Hg vapour removal during combustion of lignite. After physical oxidation of Hg in the flue gas, its effectiveness has increased twofold.

Highlights

  • Mercury is a highly toxic heavy metal with no physiological relevance for living organisms

  • Global anthropogenic-derived emission of mercury is estimated at approximately 2000 Mg (AMAP/UNEP 2013), with the largest share of emissions attributed to artisanal mining and small-scale gold mining (37%), coal combustion (24%), mining, metallurgical industry and non-ferrous metal production (10%) and cement manufacture (9%)

  • Greatest mercury removal from flue gas from coal was achieved with AC (92.9%), followed by LDC (88.1%), RGC (81.3%), coke dust (CD) (80.3%) and RC (78.7%)

Read more

Summary

Introduction

Mercury is a highly toxic heavy metal with no physiological relevance for living organisms. Due to its adverse impact on Responsible editor: Philippe Garrigues. Such widespread presence of mercury in the environment originates from natural and anthropogenic sources (Pirrone et al 2012; Kocman et al 2013). Global anthropogenic-derived emission of mercury is estimated at approximately 2000 Mg (AMAP/UNEP 2013), with the largest share of emissions attributed to artisanal mining and small-scale gold mining (37%), coal combustion (24%), mining, metallurgical industry and non-ferrous metal production (10%) and cement manufacture (9%). These emissions originated mostly from combustion processes (50%), cement manufacture (15%) and non-ferrous metal production (13%) (AMAP/UNEP 2013)

Objectives
Methods
Findings
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call