Active Damping of Ultrafast Mechanical Switches for Hybrid AC and DC Circuit Breakers

Abstract

An active damping method for Thomson coil actuated ultrafast mechanical switches is proposed, including its control. Ultrafast mechanical switches are crucial for both dc and ac circuit breakers that require fast-acting current-limiting capabilities. However, fast motion means high velocity at the end of travel resulting in over-travel, bounce, fatigue, and other undesirable effects. The active damping proposed in this paper not only avoids such issues but actually enables faster travel by removing limitations that would otherwise be necessary. This active damping mechanism is applicable in particular to medium- and high-voltage circuit breakers, but can be extended to actuators in general. A 15 kV/630 A/1 ms mechanical switch designed to enable the fast protection of medium voltage dc circuits is used as a testbed for the concept. The switch is based on the principle of repulsion forces (Thomson coil actuator). By energizing a second coil, higher opening speeds can be damped, resulting in limited over-travel range of the movable contact. The overall structure is simple and the size of the overall switch is minimized. To validate the concept and to study the timing control for best active damping performance, both finite element modeling and experimental studies have been carried out.