Activation of organoclays and preparation of polyethylene nanocomposites

Abstract

AbstractA dimethyl dihydrogenated tallow ammonium bentonite, edge modified with 1-hydroxydodecane-1,1-diphosphonic acid, was activated by intercalation of polyethylene-block-poly(ethylene glycol). A high-density polyethylene (HDPE) nanocomposite was produced by the gradual dilution of the intercalated organoclay with HDPE, via melt mixing, until a final clay concentration of 0.3 wt% was reached. While polymer crystallinity was unaffected by the addition of the clay, polymer transparency increased dramatically. Microscopic examination of compression molded films verified that polymer nucleation increased to such an extent that the normal spherulitic structure was completely absent. A significant reduction in gas transmission accompanied the increased film clarity. Compared to the pure polymer, oxygen and water vapor permeabilities were reduced by approximately 55 and 70%, respectively. With proper dispersion, significant improvements in both physical and barrier properties are achievable by the incorporation of nanoclays into polyolefins. Additionally, it is significant that these benefits can be realized at clay concentrations consistent with those of common polymer additives, like stabilizers, clarifiers, and colorants.