Acoustic insulation characteristics improvement of a thick CNT-reinforced doubly-curved shell by using GPLRC and MEE composite layers

Abstract

Noise reduction in structures and human living environments is one of the most important issues in engineering that is always given special attention. Sound insulation has always been improved using different methods, one of which is to use the properties of materials. Herewith, the aim of this paper is to take advantage of graphene-platelet reinforced composites and magneto-electro-elastic (MEE) material properties for sound attenuation. The present paper deals with the analysis of sound transmission loss (STL) through a three-layer sandwich doubly-curved shell where an MEE sheet is integrated with two nanocomposite sheets. In addition, these two nanocomposite sheets are reinforced by functionally graded (FG) distributions of CNT and graphene platelet (GPL)-reinforced composites, respectively. Firstly, the three-dimensional elasticity theory is employed to derive the governing equations of motion. Then, the vibroacoustic analysis for the resultant equations is completed according to the state space and transfer matrix method. Comparing the obtained results with the available literature discloses that the offered procedure has a high precision for structural acoustic problems. In the next step, in addition to inspecting two kinds of MEE composites, the effective parameters, such as layup configuration, FG distribution, volume fraction, weight fraction, radii of curvature, electromagnetic boundary conditions, and interphase thickness, are assessed on the STL. This assessment shows that the parameters involved in this paper are highly interdependent. Accordingly, the analysis of these parameters is done simultaneously with the aid of three- and four-dimensional plots in order that the optimal value for each parameter can be realized. As seen clearly in the outcomes, the electromagnetic boundary conditions parameters, compared to the other parameters, can much more alter the STL trend, so that a slight change in electric potential results in great change in the STL.