Abstract
In the hydraulic fracturing tests, water was injected into four kinds of granitic rock specimens with different grain sizes. The fault plane solutions of acoustic emission (AE) indicated that the shear fracturing is dominant in the specimens with larger grains whereas the tensile fracturing is dominant in those of smaller grains. In addition, the experiments were conducted in granitic rock specimens of the same kind, under three different conditions: injection of water, injection of viscous oil and pressurization via a urethane sleeve. The shear fracturing was dominant due to water injection and the pressurization whereas the tensile fracturing was dominant due to viscous oil injection. Further in a field, AE was monitored by a borehole sonde in the hydraulic fracturing to measure rock stress. The AE count rates increased with closing and reopening hydraulically induced cracks. The result suggested that AE monitoring could improve the reliability and the accuracy of hydraulic fracturing stress measurements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
