Acoustic characteristics from an in-water down-the-hole pile drilling activity.

Abstract

Sound generated by pile installation using a down-the-hole (DTH) hammer is not well documented and differs in character from sound generated by conventional impact and vibratory pile driving. This paper describes underwater acoustic characteristics from DTH pile drilling during the installation of 0.84-m shafts within 1.22-m steel piles in Ketchikan, Alaska. The median single-strike sound exposure levels were 138 and 142 dB re 1 μPa2s at 10 m for each of the two piles, with cumulative sound exposure levels of 185 and 193 dB re 1 μPa2s at 10 m, respectively. The sound levels measured at Ketchikan were significantly lower than previous studies, and the sound was determined to be non-impulsive in this study as compared to impulsive in previous studies. These differences likely result from the DTH hammer not making direct contact with the pile, as had been the case in previous studies. Therefore, we suggest using the term DTH pile drilling to distinguish from DTH pile driving when the hammer strikes the pile. Further research is needed to investigate DTH piling techniques and associated sound-generating mechanisms and to differentiate the various types of sound emitted, which has important implications for the underwater sound regulatory community.