Abstract
The elastic properties of unpoled and prepoled (Na1/2Bi1/2)TiO3-xBaTiO3 (NBT-xBT) single crystals near the morphotropic phase boundary were investigated as a function of temperature using Brillouin light scattering. The acoustic mode frequency and the related acoustic damping of unpoled NBT-xBT showed very broad minimum and maximum, respectively, consistent with typical relaxor behaviors. The frequency softening of the longitudinal acoustic mode together with the increase in acoustic damping was largest along the <100> direction, indicating that polarization fluctuations were most substantial along this crystallographic direction. The difference in acoustic behaviors between the unpoled NBT-xBTs with x = 0.05 and 0.08 were negligible, which means that the NBT-xBT system exhibits typical relaxor properties over a certain composition range of at least 5~8%. The obtained relaxation time of polar nanoregions in the paraelectric phase showed a gradual slowing-down character without any critical divergent behavior. The prepoling of NBT-xBT along the <100> direction induced drastic changes in both mode frequency and damping at ~110 °C when the poling field was larger than 1.4 kV/mm, corresponding to the depoling process from macroscopic/mesoscopic ferroelectric order to ergodic relaxor state upon heating. Phase coexistence of ferroelectric and relaxor states was observed at the intermediate poling field of 1.4 kV/mm.
Highlights
Piezoelectric materials are indispensable to numerous devices that convert mechanical energy into electric energy and vice versa [1,2]
The acoustic properties of unpoled and prepoled (Na1/2 Bi1/2 )TiO3 -xBaTiO3 (NBT-xBT) single crystals near the morphotropic phase boundary were investigated over a wide temperature range using
The Brillouin mode frequency and the damping factor of the longitudinal acoustic mode of NBT-xBT with x = 0.05 showed broad minimum and maximum, respectively, which denotes that the unpoled NBT-xBT near the morphotropic phase boundary (MPB) exhibit typical relaxor behaviors
Summary
Piezoelectric materials are indispensable to numerous devices that convert mechanical energy into electric energy and vice versa [1,2]. (1 − x)(Na1/2 Bi1/2 )TiO3 -xBaTiO3 (NBT-xBT). Is an archetypal lead-free material showing relatively good piezoelectric performance at compositions near the morphotropic phase boundary (MPB) [4,5,6]. The MPB composition of NBT-xBT, which divides the (Na1/2 Bi1/2 )-rich rhombohedral phase and the Ba-rich tetragonal phase, is approximately 6~7%, at which the piezoelectric properties become maxima. It was reported that poled NBT-xBT near the MPB showed an electromechanical coupling coefficient of 62% and a piezoelectric coefficient d33 of. The possibility of tuning of MPB, i.e., the creation and destruction of MPB by electrical poling, has been suggested [10]
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
