Abstract
The authors investigate the sensing properties of single-walled carbon nanotubes (SWCNTs) films, which are used as nanostructured materials for chemical sensors onto three types of transducers using different principles of operation as surface acoustic waves (SAWs), quartz-crystal microbalance (QCM), and a standard silica optical fiber (SOF) for detection of volatile organic compounds at a room temperature. The sensing probes have been configured as 315- and 433-MHz SAW two-port resonator-based oscillator, 10-MHz QCM resonator, and SOF light-reflectometry-based system at a wavelength of 1310 nm. A nanocomposite film of SWCNTs embedded in a cadmium-arachidate matrix was deposited by Langmuir-Blodgett (LB) technique onto the SAW sensors. An LB multilayer of SWCNTs-onto-CdA buffer material was also deposited onto the QCM and SOF sensors. The experiments demonstrate that carbon-nanotubes acoustic and optical sensors are highly sensitive to a wide range of polar and nonpolar organic solvents up to a sub-ppm detection limit at a room temperature
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
