Acinar flow irreversibility caused by perturbations in reversible alveolar wall motion.

Abstract

Mixing associated with "stretch-and-fold" convective flow patterns has recently been demonstrated to play a potentially important role in aerosol transport and deposition deep in the lung (J. P. Butler and A. Tsuda. J. Appl. Physiol. 83: 800-809, 1997), but the origin of this potent mechanism is not well characterized. In this study we hypothesized that even a small degree of asynchrony in otherwise reversible alveolar wall motion is sufficient to cause flow irreversibility and stretch-and-fold convective mixing. We tested this hypothesis using a large-scale acinar model consisting of a T-shaped junction of three short, straight, square ducts. The model was filled with silicone oil, and alveolar wall motion was simulated by pistons in two of the ducts. The pistons were driven to generate a low-Reynolds-number cyclic flow with a small amount of asynchrony in boundary motion adjusted to match the degree of geometric (as distinguished from pressure-volume) hysteresis found in rabbit lungs (H. Miki, J. P. Butler, R. A. Rogers, and J. Lehr. J. Appl. Physiol. 75: 1630-1636, 1993). Tracer dye was introduced into the system, and its motion was monitored. The results showed that even a slight asynchrony in boundary motion leads to flow irreversibility with complicated swirling tracer patterns. Importantly, the kinematic irreversibility resulted in stretching of the tracer with narrowing of the separation between adjacent tracer lines, and when the cycle-by-cycle narrowing of lateral distance reached the slowly growing diffusion distance of the tracer, mixing abruptly took place. This coupling of evolving convective flow patterns with diffusion is the essence of the stretch-and-fold mechanism. We conclude that even a small degree of boundary asynchrony can give rise to stretch-and-fold convective mixing, thereby leading to transport and deposition of fine and ultrafine aerosol particles deep in the lung.