Acid-base interfaces in fiber-reinforced polymer composites

Abstract

The role of Lewis acid-base interactions at the fiber-matrix interface in composites is studied with both glass and Teflon fibers. In the glass fiber case, surface chemistry is modified with amino-, methacryloxy- and glycidoxy-silane coupling agents (A-1100, A-174 and A-187, respectively). Silane adsorption mechanisms as well as the properties of filament-wound, unidirectional epoxy and polyester composites are explained by a combination of X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and flow microcalorimetry. The heats of adsorption of pyridine and phenol prove that the coupling agents add acidic sites to the glass fiber surface as well as stronger basic sites. The subsequent adhesion of the matrix polymers and the short beam shear strengths of composites are explained on this basis. The Teflon fibers are first etched with sodium naphthalene solutions, and then sequentially hydroborated and acetylated, producing approximately monofunctional hydroxyl (acidic) and ester (basic) groups on the surfaces, as determined by XPS, FTIR, and electrophoretic mobility analyses. Composites prepared with the acetylated fibers and a chlorinated polyvinyl chloride (acidic) matrix are superior in tensile properties, and SEM fractography shows PTFE fibrillation, indicative of good fiber-matrix adhesion and stress transfer, in this case only.