Acid rain—a review of the phenomenon in the EEC and Europe: Report prepared by Environmental Resources Ltd

Abstract

Analytical methods of speciation for the control of water treatment processes, particularly for the removal of fluoride by aluminium hydroxide polymers as precipitant, have been discussed. It has been shown that combination of ultrafiltration with spectroscopic methods and fluoride ion-selective electrode offers a powerful means for the control of both the precipitant and pollutant, e.g. fluoride. 27Al n.m.r. has been used for the identification of hydrolytic products of aluminium(III) and the ultrafiltration technique has been applied for the separation of the active polymer. The hydrolytic products were also characterized by timed spectrometric method. The interaction between aluminium hydroxide polymer and fluoride was studied by means of fluoride ion-selective electrode, ultrafiltration and atomic absorption spectrometry. The usefulness of these speciation methods for choosing the best conditions for water treatment process is discussed. By applying them for the removal of fluoride, it was found that the fluoride levels can be brought down to less than 10 mg l−1, the limit set by Swiss regulatory body for discharge of waste water. The importance of using such speciation methods for evaluating the possible impact of the “products” of the water treatment (dissolved species in treated water, discharged solid) is also emphasized.